HYPERTHERM NOZZLE 420134 GENUINE

Stock Code: CBL-00413173
Manufacturer Part No: 420134

A minimum order quantity of 5 applies to this product.

This product must be ordered in multiples of 5, quantities will be rounded up as you add them.

Descriptions

Genuine Hypertherm plasma torch nozzles for the T AIR torch as used with the Powermax 30 AIR plasma cutter.

This nozzle, part number 420134 is one of the most commonly changed parts when using a plasma torch. The nozzle focuses the plasma arc by funneling gas flow. The nozzle or cutting tip orifice should be clean, symmetrical and the correct size to maintain cutting performance. As the tip or nozzle orifice is worn away with normal cutting applications, the arc will get wider and less defined. You may find the kerf of the cut increases. A less concentrated arc will also reduce cutting speeds.

WHEN TO REPLACE: Changeover of this consumable should be performed when the orifice becomes damaged, the edges round off and mis-shapening. Failure to change these can result in poor cutting performance.

The 420134 nozzle is for use when drag cutting between 15 and 30A.